@USADave show us the bridge and also what scale you're planning. For instance using a T.O.M type bridge with a 24.75 scale I find 630mm to be the sweet spot for the initial scale line then add 3mm f...

@usadave Thats a nice build, I can't imagine selling any of mine. Let us see a photo of your bridge and we'll have a better idea of how to advise you.

Hi Everyone, Here is my latest build: Attachment : SSOOCBody.jpg Attachment : SSOOCBody-Smaller2.jpg Attachment : KIII.jpg Could not have done it without this awesome site. (and I...

@boo I’m amazed with this acoustic build of yours, I’m slowly being convinced to have a go myself. The acoustic build is so different from the electric, a whole range of new challenges, I'm thorou...

@robin I’m amazed with this acoustic build of yours, I’m slowly being convinced to have a go myself. And……. I recognise that bandsaw. Still going strong is it?

@russ Hi Robin, I cut my kerfed lining to 0.5mm thick. You have to be very careful with it but it is very bendy. I reckon I'm not far from 0.5mm and it probably is bendy enough for going round the...

@robin Hi Robin, I cut my kerfed lining to 0.5mm thick. You have to be very careful with it but it is very bendy. 🎶🙂🎸🙏

@nsj Spring claw is chrome which is hard to solder. Probably need to file away a small part to solder onto. If you get to the copper layer that should be enough as it solders well. Chrome might be po...

@rocknroller912 The solder flows lovely on the pots I've used so far and you'd have to file it off to remove it! 🤣 The only thing I can struggle with is the spring claw using a trem, they n...

@nsj No, metal forms an oxide which prevents a good solder joint. Aluminium and its alloys is one of the worst and very difficult to solder or weld. Most pots are an aluminium alloy.

@rocknroller912 I've seen people mentioning scuffing/sanding pots to solder but I've never found the need, do some come with a weird coating or something?

@cafebrouge Solder flows towards hot surfaces and you need to sand any pots to take off metal oxide just before you solder. Same with wires, take off the insulation just before and don’t put any hand...

Back grafts and braces glued on now. The back is made from three pieces, so grafts at the two joins rather than one central graft. A bonus of having two back grafts is that they stopped the braces sli...

I've had a go at making kerf lining with my version of a jig that was in a video that @swepri posted a few days ago. My first attempt kerf lining isn't as bendy as I'd hoped it would be. The convenien...

So we finally decided to copy the switch location like his musicman JP6 guitar which works out nicely. I thought it'd be in the way but it isn't. I drilled from the front with a 3mm bit, then used a 3...

@markbailey lol it is shit isn't it! Lead free for a problematic life! @cafebrouge if you're on FB there's some not bad groups, UK Amateur Guitar Builder and Luthiers Club are a couple. For the...

@cafebrouge What problems are you having with soldering? - maybe we can help make it FUN! top tip: Keep your tip clean and shiny and tip top. top tip 2: Use quality '60/40 solder' not the usual modern...

@cafebrouge cheers! It's a partscaster I put together before I got into building from scratch. I bought the finished body and scratch plate from the same chap. Have fun with your build!

@liebe really impressive, Dan! Thanks for reaching out. Love that pickguard - was that your design? I like the Tono Caballo ones so might stick with for the Caballo Tono Ligero HH thinline I'm going ...

Very Shiny @boo. You're definitely the go to finishing guy. 👍 🙂🎸🎶🙏