@steveadams I have to agree with @bpower it’s hand made so there will always be things that show this especially on a first build. Regarding blemishes on the white, is it worn through or dirt which h...

Man @steveadams. My opinion is.... that is fantastic. I think it came on absolutely great. That little blemish on the black white black I wouldn't even worry about. In my mind, those are the tell tail...

No need to wait...the sequel is here..... Love to hear your thoughts.. Attachment : PART 10 - fix rossete part 2.m4v Cheers Steve

OK..get your beer and pringles ready..here is Part 1... I had to split the video into 2 to reduce the file size....not just to tease you..ha ha Cheers Steve PS... I really do appreciate all your thoug...

@tej It was a new Dremel bit straight from the packet. Likely the very soft wide grain wood.

I've just been and picked up some mahogany this evening, 150mm square x 960mm long. I think I'll try to make a thru neck from one of these, once I've figured out how I'm going to cut it. Attachment...

Man @tej ..... now I want pringles. 🙂

Hey @mattbeels and @rocknroller912 thanks for the comments...my apron is getting very dirty.... I am in the middle of editing the update on the rossette saga...I will upload this evening.. No, Matt di...

So sorry about your troubles @steveadams! Have you come up with anything or heard from Mark?

This is My Favourite Song For This Moment........the joy of bored youthfulness. 🎸🙂🎶🙏

Good thing this is only a practice on cheap wood as it didn’t go too well. I got some bad tear out around the outside edge and had to do a fudge with violin purfling. Definitely going to be wall art. ...

@tej If it’s got side adjustment it sounds like a plan but I’m not an electric guitar expert. If your neck is a tight fit there shouldn’t be much difference between the test fit and the final. I can s...

@tej What type of bridge do you have. If it has some intonation adjustment that should take care of any small changes after the neck is glued.

If your neck pocket is tight then the neck will be in the same position so you should be able to drill bridge holes now - can't see it being a problem - only issue would be if the neck can wobble side...

@tej Your carving is looking good. As for removing fingers, I've tried it and wouldn't recommend it.

Attachment : DEB0CED3-5478-458B-811D-F8695BBADDC6.jpeg

@tej Thanks for asking, I’m still working on it. I had a router malfunction of course possibly due partly to operator error but partly not. I found that the centre pin on my Dremel circle cutter was ...

A lot of good hard work going on there @clinton. 👍😁 🎶🎸🙏🙂

Attachment : 209256218_4483220675045110_7395343758635190899_n.jpg

Hi, This isn't for me (I want to try my hand at finishing my own) but a friend of mine has a Fender Jaguar that is now looking a bit worn and he just asked me if I had any idea what it would cost to r...