Well done - the air version wasn’t an option for me - my compressor isn’t big enough - the dust hose goes straight into my shop vac and that has a pow...

It is very good - only had mine for about a year and haven’t used it lots but it does work really well.

@darrenking But is it enough to protect you from a shit storm of mistakes and disasters ?!! Of course not........

Agreed on the prep - I have a cheap planer thicknesser that can cope with half a body blank at a time so could take thicker wood, prepare two halves o...

Agree with Mark - need to keep things clean - evict the bikes……

When I first saw ‘oily rag’ I started thinking Cockney Rhyming Slang - oily - oily rag - fag - cigarette…… 🤩……..

Neck looking good and the headstock isn’t too pointy.

Looking good - what hardware are you going for?

If your neck pocket is tight then the neck will be in the same position so you should be able to drill bridge holes now - can't see it being a problem...

Not tried finishing before glueing in neck - would the oil make the glue joint weaker?

Think finer grits are for removing scratches from coarser ones not for removing lots of stuff..... You've got to love sanding - and got to love you...

I have a box of bits that could be useful for sanding at some stage.....

I've got bits of broom handle, a chunk from a wooden curtain pole, some plastic tubs - all different diameters.

I think it is just hard work and not moving through the grits until smooth........

I sold 😥 my Mexican Strat - I got it very cheaply on eBay - lots of fret wear on frets 1 to 6 on the top three strings - one piece maple neck with var...

I've just got a couple of Screwfix Titan 1400W vacuums - had one but moving it around was a pain as I have two rooms - the power take off works and it...

I have thick, medium, thin and very thin superglue…… For fret filling I use the thin - the thinner it is the easier it ‘wicks’ - that also means tha...

@Tej I use thin superglue and only add small drops - the drops vanish down the slot, usually by the time you get to the end of the fretboard you can g...

Superglue works - you do need to apply it in 3 or 4 passes on end side then when dry do the other - too much at a time and it will run down the fretbo...

Think the truss rod size changed - now a 6mm truss rod comes with the kit - not at home to check - you need to make the slot wider at the adjuster end...