Errrrr, ok. @Deej - please ignore my comment. Boo was just winding you up. 🤔

@rockpile99 that make a lovely thru neck...

OK, this is done, polished and ready to be sent to Mark and Carol, I’ll order a courier tomorrow Maybe give it a few days @Boo - probably won't be top of Mark's to-do list right now ...

There are some great options for alternative tone wirings out there Louis, and some websites devoted just to them! Take some time looking through articles on Premier Guitar ... Somewhere, I've got a ...

@tej Welcome to the mad house, insanity rules so let it rip

Welcome @tej! You’ll have fun here for sure, especially if you have a good sense of humor (see how I spelled that "properly" @boo?) cause there are some real jokers around here...

I think I’ll leave this Q to more qualified electrical knowing members..the thought always gives me shivers when I think of soldering!

Cheers @tv101 its 18mm msg with a couple of 1x2 pine rails. Ive just got a very similar bit but it’s good to know decent places to buy from. 2mm is too much, that’s great, that’s definitely where I’ve...

That's a very handy jig. I've got something similar, and it's got me out of jail a few times. Pointers; Looks like your workpiece is secured in place - make sure you wedge it on the sides too, so it ...

Attachment : IMG_0347.MOV Attachment : 5BF8B477-A202-442F-A542-873D8032534D.jpeg getting back on the horse as they say, because my blank needs a bit of work (I bought before I found Mark) I...

@lemonshoes To route a binding channel there has to be a reference point for the router guide bearing ot a straight edge to work from, so I don’t know how you would get this unless you finished the ne...

My thinking on the process was something like this: Route binding channel Install/glue binding on the neck Use fret tang nippers for cut the excess binding height above the fretboard to get it relativ...

@lemonshoes I think if you installed binding on a non radius fretboard and then tried to radius it the binding would probably get damaged. For installing undercut frets on a radius FB my steps would b...

Hello, I apologize if this has come up before. I did a quick search but didn't find anything. I have a nice chunk of Black Limba which I'm planning to use for an LP style body. I'll likely be orde...

I have an embarrassing amount of "stuff" on my workshop shelves that I've either bought with good intentions of using (but haven't), bought but decided to use something else, bought because I was buyi...

Welcome from me too @Tej Kit guitars are the gateway drug into guitar building 😉 but you can learn a lot putting one of those together - often how not to build the parts if you want them to f...

Must be very satisfying@robinwhen a repair job works well. @russ It definitely is satisfying. After cursing myself for stupid errors or accidents, I quite enjoy the "fixing things" aspect of guitar...

Must be very satisfying @robin when a repair job works well. 👍😁 🎶🙂🎸🙏

@boo Do you mind? I resemble that remark!

Welcome @tej. I'm sure you'll have some fun on this forum and building your guitars. Cheers, Russ 🙏🎸🙂🎶