Attachment : IMG_0347.MOV Attachment : 5BF8B477-A202-442F-A542-873D8032534D.jpeg getting back on the horse as they say, because my blank needs a bit of work (I bought before I found Mark) I...

@lemonshoes To route a binding channel there has to be a reference point for the router guide bearing ot a straight edge to work from, so I don’t know how you would get this unless you finished the ne...

My thinking on the process was something like this: Route binding channel Install/glue binding on the neck Use fret tang nippers for cut the excess binding height above the fretboard to get it relativ...

@lemonshoes I think if you installed binding on a non radius fretboard and then tried to radius it the binding would probably get damaged. For installing undercut frets on a radius FB my steps would b...

Hello, I apologize if this has come up before. I did a quick search but didn't find anything. I have a nice chunk of Black Limba which I'm planning to use for an LP style body. I'll likely be orde...

I have an embarrassing amount of "stuff" on my workshop shelves that I've either bought with good intentions of using (but haven't), bought but decided to use something else, bought because I was buyi...

Welcome from me too @Tej Kit guitars are the gateway drug into guitar building 😉 but you can learn a lot putting one of those together - often how not to build the parts if you want them to f...

Must be very satisfying@robinwhen a repair job works well. @russ It definitely is satisfying. After cursing myself for stupid errors or accidents, I quite enjoy the "fixing things" aspect of guitar...

Must be very satisfying @robin when a repair job works well. 👍😁 🎶🙂🎸🙏

@boo Do you mind? I resemble that remark!

Welcome @tej. I'm sure you'll have some fun on this forum and building your guitars. Cheers, Russ 🙏🎸🙂🎶

Hi everyone, I stumbled across this fantastic site while looking for info around guitar building advice. After finishing and constructing a cheap kit guitar and being pleased with the results I’ve dec...

Been playing around with body ideas for the next build. Attachment : IMG_20210407_161124.jpg This one is really a variation on what I've done before but at least I'll know it will work. Atta...

Hi Louis It's been nearly 30 years since I did my electronic engineering HND but your circuit diagram makes sense. I've never seen a guitar use capacitors that large though - do you really mean 27 and...

Hi Louis It's been nearly 30 years since I did my electronic engineering HND but your circuit diagram makes sense. I've never seen a guitar use capacitors that large though - do you really mean 27 and...

Update: Did the fretjob and i am cutting the scratchplate now (pictures coming soon). I have a question regarding electronics. I am using a humbucker, 1tone, 1 volume configuration but i want to add 2...

I think I must have started an order then stopped either because something else came up or the next item I wanted was out of stock. Then when I went back a week or more later I forgot to check that th...

And now on to the next fix. Two of the tuner holes are out of line, so plugged and try again. Attachment : 20210407_162210.jpg

Is there an echo? Echo? Echo?

@tv101Is there an echo? @boo that'll be an attempt to catch up with you on the leaderboard 🙂