Simple little amp - I really only made it to practice my soldering skills. Mini-toggle is a grit-switch (more, or less), following by tone, gain and volume. Drives pretty much any speaker. Sounds p...

I sanded it back today and some spots needed some more filler, just a very thin skim. When this is dry I’ll sand it flat and then mask up for more primer. Attachment : 93690198-3021-4C88-962A-F69...

is it the case you need to build it up slower leaving more drying time? @tej It would probably sink anyway, however I applied it. It’s good that this happens because it shows that things are not quit...

Got a 18X18X2"(450mmx450mmx50mm) block of what I suspect is sapele, it's possibly sipo or khaya but looks like sapele to me. It'll do fine. I need to work on scaling the Explorer drawing that I have, ...

@tej Crystalac Brite Tone I think you are looking for. I have still yet to try it also.

next will be a 7 string, I borrowed one off someone a week or so ago and really enjoying it. There will be a lot more carving, looking into more intricate inlay work too. Also want to make the fretboa...

@abbbbbottttt You will need a longer router bit.

@tej Use a bit of bees wax on the threads of your screws to lubricate them and they will go in much easier. 👍

Mr Talisker visited @tej A very nice dram indeed. 🏴󠁧󠁢󠁳󠁣󠁴󠁿🥂

Perhaps pull it out and try again? I had already pulled it out once before taking that picture. @wayne_f Ahhhhh….. Yes, pull it out carefully and clean the slot again. I would perhaps cut another fr...

@wolframmalukker First of all, welcome to our online community of guitar building. I’m looking forward to watching you build your electric ukulele, it’s something I’ve been thinking about building fo...

Then I attempted to start putting the frets in. I couldn't even get the first one to go in all the way. The slots were filed before the attempt but that didn't seem to help enough. @wayne_f Did you ...

@tej Great job man. Feels good doesn’t it? Glad you enjoyed it. What you got planned next? You know you want to. 😉👍🎸

Welcome Pete, strongly suggest you marry your girlfriend, if you lock that in now before you fill the walls with guitars it’s more likely she’ll stay 😉😋 Looking forward to seeing your ...

@poco7 Well it looks like you are having fun and that pleases me. Just remember to take you time and enjoy it. It’s not a race and you will have a greater understanding of what you are doing if you re...

More coats applied and I’ve got sinkage and cracking so more repairs needed. I’ll let it fully dry before sanding back before applying more filler. This may look bad but all it’s doing is showing me w...

Wait.. What.. I thought I was supposed to build a guitar. 🤔 😋 @koendb I could really confuse you by saying “You are now cooking with gas” 🤣🤣🤣🤣

First coat of high build primer. Attachment : C720EB99-0101-4E5A-8A86-F82118C08CEB.jpeg Attachment : C2F0784D-A920-4135-9B27-986506A99DCA.jpeg Attachment : 9CB4DE34-4B69-4149-AA09-B...

Received these today ! Thanks Carol and Mark. Now it cant go wrong @koendb Now you are cooking. Good luck. 👍

Time for a bit of primer. First I finished masking it all off properly. I have a roll of masking paper and some cheaper masking tape for this. Attachment : 5F43EC80-0C99-4E61-8471-637F9C541AD1.jp...