Thanks @Rocknroller912 , hopefully we'll get some better news tomorrow when we go for my wife's results tomorrow. Meanwhile, grain filling and sanding will keep me occupied.

Dots are in, 5mm abalone. I used a depth stop on the drill bit to keep everything consistent as opposed to eyeing it in which worked a treat. For the super glue I let a small drip run down a cocktail ...

@markbailey This is the dent (bottom left) I was talking about. I’ll opt for the drop off water first and see if that helps before trying anything more severe! Attachment : BE026BE3-48B5-4C35-B542...

Dent, what dent 🙂 Attachment : 714D288F-AD17-4BC1-A7D0-1417DAC94D50.jpeg

Hi guys, I've not posted for a while, real life has got in the way and guitar build gone on the back burner. My wife was diagnosed with breast cancer a couple of months ago. She's now had surgery twic...

A different look - I like it 👍🏻

Thats the tuner holes lined up at last, all the butchery is hidden under the washers. Also reshaped the headstock a little to make the holes an equal distance from the edge and to give the D tuner kno...

I was challenged by a friend to do a metallica demo on my Flying V.So I just made my first facebook video ever 😀 Don't judge my playing too much, My sloppy playing is not getting any better with age :...

My favourite song today;

I thought it was bloody funny, still do. You guys are a breath of fresh air.

Looks like we are all in the remedial class for routing, extra practice needed. @rocknroller912 Absolutely! 😉

This is My Favourite Song For This Moment......a bit more than 10 years now. 🎸🙏🙂🎶

Sloppy router work: Check !

I think technically it was @mattbeels that first said I sucked at using a router 🤣 but who am I to argue. No one will ever see it so it's all good. I really need to get back to this, crappy ...

Attachment : elm.jpg The log. The design was based on lots of looking at you tubes and drawings and photos until I was confident (?) about scale lengths body sizes widths etc. having concluded tha...

This is My Favourite Song For This Moment..... 🎶🙂🙏🎸

now with a small chip too so I’ll need to reprofile the edge and wrap the headstock with something to protect while I carve the neck. I gave up caring about tear out and small dings and chips, caus...

This is My Favourite Song For This Moment....sing along now. 🎸🎶🙏🙂

Being a tool junkie I bought a very nice carbide scraper burnisher from Workshop Heaven, but it seems you can use pretty much anything that's hard enough.

I forgot to install the side dots Side dots: check! Attachment : IMG_20210528_141250159.jpg