OK so I'm following Marks video on it but I've come to cut the actual angle so measured 20mm then 300mm then Mark says 67mm....now on a 70mm width side piece that leaves 3mm at the top doesn't it. On ...

Hi guys. I'm just building the headstock angle jig for the bandsman. Excuse me if I'm being super thick here im totally new to all this so be gentle lol. OK so I'm following Marks video on it but I've...

Now I need to figure out how to get the blobs of superglue off the fretboard. Why is it every time Mark says 'it's important you don't x,y,z' do I always manage to do exactly that 🤣 Anyways, ...

Slow progress with life getting in the way of late. Neck now profiled with the router and I’ve put the back veneer on. The front one needs to wait until I’ve levelled everything for the fretboard. I w...

Do you think I’ve got to many ? No such amount exists ... You have planned wisely to be able to meet future needs.

oh my.... where have I been all this time? Since the lock down I have been missing live music. Does this "acoustic bliss" happen every thursday on youtube? When does it start. Unfortunately, in my are...

Thank you @russ, a man of exquisite taste and musical appreciation. And all wearing the same uniform. 😛@jamesbisset. I’m going to find my old denim jacket for the next one. Seriousl...

Well, everything and everyone on last night's show were completely overshadowed by the return of the @jamesbisset curtains. This is such an audacious piece of sleight of hand. @tv101 is trying to dis...

and...... barring a couple of mistakes (which I think I've hidden) I have almost proved him right. You certainly proved him right, great guitar! I've made about 20 guitars and basses now, not one ...

Hi everyone. I stumbled across Mark's live 'Lockdown Lucy' streams during lock down in 2019, and I took his challenge when he said anyone who can draw a straight line can build a guitar. and...... ba...

Did a little bit more on this neck today. Drilled the tuner holes and rough cut the headstock. Installed the truss rod and glued the fillet in. Test fitted a couple of tuners and had to put the neck b...

@rocknroller912 can’t see why you’d need to as it’s not going to be pushing on any wood. I can’t find any examples on the internet where anyone’s taken a fillet that far either. Apprécie though I don’...

Today was a good day! Sanded the complete body with 100, 150 and 240.Call me crazy but I actually like sanding a guitarbody .. I enjoyed it so much, that I decided not to do the contour roundovers wit...

@markbailey thanks for that, do you know of any non-spray finishes that work well over them? Given the economy of scale clearly A3 is best “value” which also means I’ll have to make many many guitars ...

A bit more marking up before getting it back into another jig for headstock thicknessing. Attachment : 3BF458B2-92C5-4DB8-A06B-9CC0EB8CB251.jpeg Attachment : 187F0507-1993-4FF5-B51A-8FB9E9...

A bit of routing on this neck today. Attachment : 76B958E8-10DE-4892-BBD9-B921EEF58682.jpeg Attachment : C74C1391-7865-4332-931C-466BF7A48578.jpeg Attachment : A9EB86DD-7E03-4C44-B6...

Thanks everyone...@bpower @koendb @mattbeels @rocknroller912 @russ Really appreciate your comments..I'm afraid to say that I had to sack my assistant, he was making too many demands and becoming very ...

Some of you were asking where I get my custom 'Dry Transfer' logos made - here is the link:

Well done guys - top job! Very enjoyable to watch thanks for sharing!! Don't worry about the small fracture - it will be removed during the 'shaping the back' procedure...

Hi Guys Here is part 8... I have a special guest this time...hope you enjoy... cheers Steve Attachment : PART 8.mp4