you want/need consistant clamping pressure across the wood and that’s going to be hard with a profile cut into it. On the other hand pretty unwieldy to cut once the next is attached though with adequa...

This isn't for me (I want to try my hand at finishing my own) but a friend of mine has a Fender Jaguar that is now looking a bit worn and he just asked me if I had any idea what it would cost to refin...

He just commented he might want to go for the same colour as his AC Cobra replica, which I can see working. @jonhodgson If you get me the colour code of the car, I can paint the guitar in the exact s...

Hey Guys many thanks for all your replies and thoughts... I'll take a close up photo and send it over... The initial plan was for the guitar to be just for me, however, the possibility came up that so...

@steveadams Great rescue job Steve. It's been a great learning experience for you and for us. Thanks for sharing it again. 🎸🙏🎶🙂

V2: Correct Bridge and angle slightly lowered into middle section Attachment : NeckTrough-2.png V3: Hump in bottom half of the body slightly removed Attachment : NeckTrough-3.png V1, V2 ...

That’s point taken mate. The pint comes tonight

Sound advice Rocknroller much appreciated. As I say it’s all pie in the sky at the moment but worth thinking about. Thanks for your input on this pint taken. Cheers

OK..get your beer and pringles ready..here is Part 1... I had to split the video into 2 to reduce the file size....not just to tease you..ha ha Cheers Steve PS... I really do appreciate all your thoug...

No need to wait...the sequel is here..... Love to hear your thoughts.. Attachment : PART 10 - fix rossete part 2.m4v Cheers Steve

Hey @mattbeels and @rocknroller912 thanks for the comments...my apron is getting very dirty.... I am in the middle of editing the update on the rossette saga...I will upload this evening.. No, Matt di...

Attachment : guitar hole.jpg

Attachment : 209256218_4483220675045110_7395343758635190899_n.jpg

This is harder than I thought Attachment : IMG_4225.mp4

First time making a neck through. Nervous... Attachment : IMG_4205.mp4

Attachment : 205862154_155425433314707_720471985942334843_n.jpg

You could almost be fooled into thing this Is going to be a guitar. I’ve got a small design flaw on my part, the lower horn, despite taking more of the thickness out is still in the way at the last fe...

Nice @rocknroller912!

@rocknroller912 could you use some tool wax on it, presuming the result would be sanded it should cause issues?

So after putting some straight edges either side of the fretboard with the neck in the socket it’s a few mm off centre at the bridge, plan today is to temporarily put the nut on and run threads for th...